background image

JS36 SERIES WALK-BEHIND TROWEL • OPERATION AND PARTS MANUAL — REV. #5 (06/02/16) — PAGE 11

SAFETY INFORMATION

ENVIRONMENTAL SAFETY/DECOMMISSIONING

  NOTICE

Decommissioning is a controlled process used to safely 

retire a piece of equipment that is no longer serviceable.  

If the equipment poses an unacceptable and unrepairable 

safety risk due to wear or damage or is no longer cost 

effective to maintain (beyond life-cycle reliability) and is to 

be decommissioned (demolition and dismantlement),be 

sure to follow rules below.

 

„

DO NOT

 pour waste or oil directly onto the ground, down 

a drain or into any water source.

 

„

Contact your country's Department of 

Public Works or recycling agency in your 

area and arrange for proper disposal of 

any electrical components, waste or oil 

associated with this equipment.

 

„

When the life cycle of this equipment is over, remove 

battery and bring to appropriate facility for lead 

reclamation. Use safety precautions when handling 

batteries that contain sulfuric acid.

 

„

When the life cycle of this equipment is over, it is 

recommended that the trowel frame and all other metal 

parts be sent to a recycling center.
Metal recycling involves the collection of metal from 

discarded products and its transformation into raw 

materials to use in manufacturing a new product.
Recyclers and manufacturers alike promote the process 

of recycling metal. Using a metal recycling center 

promotes energy cost savings.

EMISSIONS INFORMATION

  NOTICE

The gasoline engine used in this equipment has been 

designed to reduce harmful levels of carbon monoxide 

(CO), hydrocarbons (HC) and nitrogen oxides (NOx) 

contained in gasoline exhaust emissions.
This engine has been certifi ed to meet  US EPA Evaporative 

emissions requirements in the installed confi guration.
Attempting to modify or make adjustments to the engine 

emmission system by unauthorized personnel without 

proper training could damage the equipment or create an 

unsafe condition.
Additionally, modifying the fuel system may adversely affect 

evaporative emissions, resulting in fi nes or other penalties.

Emission Control Label

The emission control label is an integral part of the emission 

system and is strictly controlled by regulation(s).
The label must remain with the engine for its entire life.
If a replacement emission label is needed, please contact 

your authorized engine distributor.

Содержание js36h55



































































Отзывы:

Похожие инструкции для js36h55