MULTIQUIP GAC-6HZR, Руководство по эксплуатации и запасным частям

Страница: 23 / 82

gaC6HZR 60 HZ geNeRaTOR • OpeRaTiON aNd paRTs maNual — Rev. #1 (03/31/10) — page 23
OperatiOn/sHutdOwn
12. Read voltmeter on front panel of generator (Figure 20)
and verify that 240 VAC is displayed. Using an external
voltmeter as shown in Figure 20, verify that 240 VAC
is present at the 240V twist-lock receptacle.
Figure 20. 240V Receptacle
13. Connecting of loads (power tools, lighting ect.) to the
generator receptacles can now be done.
stopping the engine (Normal shutdown)
1. Place main circuit breaker (Figure 21) in the OFF
position.
Figure 21. Main Circuit Breaker (OFF)
NOTICE
When using a combination of dual receptacles, total
load should not exceed the rated capacity of the
generator.
2. Place GFCI circuit breaker (Figure 22) in the
OFF
positing.
Figure 22. GFCI Circuit Breaker (OFF)
3. Place idle control switch (Figure 23) in the
OFF
position.
Figure 23. Idle Control switch (OFF)
4. Let engine run at idle with no load for 2-3 minutes.
5. To shut-down the engine, place the generator's
operation switch (Figure 24) in the
OF
F position).
Figure 24. Operation Switch (OFF)
6. Place engine fuel valve lever (Figure 25) in the
OFF
position.
Figure 25. Engine Fuel Valve Lever (OFF)
7. Remove all loads from the generator.
emergency shutdown
8. Place operation switch (Figure 24) in the OFF position