MULTIQUIP GA6HB, Руководство по эксплуатации и запасным частям

Страница: 30 / 86

pAgE 30 — ga6HB/ga6HeB 60 hz gENERATOR• OpERATiON ANd pARTs mANuAl — REv. #0 (03/13/14)
3. On the GFCI module (Figure 36), verify that the
green
POWER LED is
ON
.
Figure 36. GFCI Module (Green LED ON)
4. Also verify that the AC voltmeter is registering a voltage
reading as indicated by Figure 41.
5. Next, press the
TEsT
button on the GFCI module and
verify that the green POWER LED turns OFF and the
red
FAULT LED turns
ON
.
Figure 37. GFCI Module (Red/Fault LED ON)
6. Also verify that the main circuit breaker switch trips to
the
OFF
position.
Figure 38. Circuit Breaker OFF (GFCI Test)
7. Verify that the AC voltmeter (Figure 39) on the
generator reads zero volts.
MANUAL RESET
P
O
W
E
R
F
A
U
L
T
GREEN
POWER
LED
MANUAL RESET
P
O
W
E
R
F
A
U
L
T
PRESS
RED
FAULT
LED
ON
OFF
mainTenanCe
Figure 39. AC Voltmeter (Zero Volts)
8. To restore power, press the RESET button (Figure 40)
on the GFCI module and verify that the
red
FAULT LED
turns
OFF
and the green POWER LED should turn
ON
Figure 40. GFCI Module (Green LED ON Reset)
9. Verify that the AC voltmeter is registering a voltage
reading as indicated by Figure 41.
Figure 41. AC Voltmeter (120/240V)
120
240
V
MANUAL RESET
P
O
W
E
R
F
A
U
L
T
PRESS
GREEN
POWER
LED
120
240
V
NOTICE
It is recommended that the GFCI unit be tested when
the generator is initially taken out of the box. Then, the
generator should be tested daily at startup.
CAuTiON
The GFCI module is designed to interrupt power when
a ground fault exists to prevent injuries and shock
hazards. dO NOT operate the generator if this test fails.
Consult a qualified electrician for repair or replacement
of the GFCI module.