MultiMax 6DS, Руководство пользователя, Страница: 18 / 24

Seite 18 von 24
2.8 Preparing the MultiMax 6ds for long print-outs
The MultiMax 6ds has a fixed position at the rear for the rollerguiding of the flange. It
is possible that some types of vinyls are not wound up even (e.g. the core sticking
out). This results in a forcing of the path of the vinyl in a wrong direction. Following
procedure can help to solve that problem:
1 Load media in the machine as described in section 1.6.1.
2 Print out a small test of 2 or 3 band-passes high.
3 Check the path of the media. The distances, marked with the white arrows and
the same number, should all be the same. The middle arrow of the second photo points
to the roll itself
4
If not, check first if the media has moved from its place of origin. If so reload
with a maximum loop at the back.
5
If it did not move, then reposition the rollerguide, so that the path of the vinyl is
as shown above. Make also sure that the flange is flush to the core.