MultiMax 6DS, Руководство пользователя, Страница: 15 / 24

Seite 15 von 24
1.7 Loading ribbon cassettes
1.7.1 Loading and removing the cassettes
The MultiMax 6ds can take up to 5 cassettes. The cassettes can be loaded or removed
from the cassette station at any time, even during printing. If the printer is missing a
color, then it will give a message on the LCD just before it needs the color. The
machine automatically detects the end of a ribbon. If the machine runs out off a certain
ribbon color while printing, then it will pause until the operator inserts a new ribbon. As
soon as the machine detects a new ribbon roll, it will continue to print and complete the
image. ALWAYS load or remove cassettes from behind the printer. To remove a
cassette, open the rear cover by puling down both latches simultaneously.
FIG 1-15 REAR CASSETTE
STATION COVER
To remove a cassette, lift it enough to pass over the rubber bumper, then pull it
backwards and out of the printer. To load a cassette, push it gently into an open
location, until it just passes the rear bumper, then press it down and pull it backwards
against the bumper.
FIG 1-16 REMOVING A
CASSETTE
FIG 1-17 LOADING A
CA&SSETTE
Close the rear cover. After the media is loaded, MultiMax 6ds will take the cassette and
estimate the amount of ribbon in the cassette available for printing.
The printer will not check the cassettes if no media is loaded
! CAUTION ! Do not insert empty cassettes,
without ribbon.