11
DSO GUI Overview
Figure 3: GUI
▪
Click the connect button
at the top left of your screen
▪
The “Connect to
DSO
” window
will pop up
▪
Click on the add button
to add the virtual DSO
▪
The “
DSO
configuration” window
opens
▪
If both software the DSO and simulator are hosted on the same computer, choose the
“Simulation”
mode
▪
If one of the GUI instances is being run on a different PC, choose
“Hardware”
instead
of “Simulation” and enter the “IP” of the PC where the simulator is
running
▪
Click on the refresh button
in order to retrieve the simulator configuration, or
configure the DSO by filling the
“
DSO
configuration”
window for the relevant IP
address
NOTE:
Any data file that has already been saved using the
DSO
software can be loaded.
