Tube Fan
6 | ENGLISH
Original instructions
INS00062-B
3
Information
3.1
Overview
1 Impeller
2 Duct mounting wall support
3 Motor support
4 Fan rating plate and terminal housing cover
Pictures used in this instruction may deviate from your actual product as
various motor and impeller models are used in this fan series.
Identification of the product
A rating plate is permanently attached to the Tube Fan and it must not be
removed.
The rating plate displays electrical, mechanical and identification information.
Each fan has a unique 14-digit numerical serial number which is listed on the
rating plate. The serial number must be provided in any future
correspondence regarding this fan as it is the unique information used for
identifying the fan in question.
A QR-code is displayed on the rating plate. This QR-code contains a link to
an information page about this product. Here you can find a digital copy of
these instructions as well as other information about this product.
3.2
Intended use
This partially completed fan is intended to be used as a component of a
ventilation system. This partially completed fan is intended to be installed in a
ventilation duct.
Illustration 1:
installation in duct
NOTICE
This fan is intended for moving air only.
DANGER
Do not use this fan in
or potentially explosive atmo-
spheres.
3.3
Technical information
For detailed technical information please visit our website from which
technical datasheets can be viewed and downloaded.
http://productselector.vostermans.com
3.4
Other information
DANGER
Ventilation system failure
This fan is manufactured to the highest quality standards. Neverthe-
less, failure of a fan can always occur.
This fan is intended to be used as a component of a ventilation sys-
tem. Where the health and well-being of humans and/or animals is
dependent on the functioning of this ventilation system, an appropri-
ate backup system must be provided such that in the event of failure
of the main system, sufficient air renewal is guaranteed to preserve
the health and well-being of the humans and/or animals.
An alarm system, which will operate even if the principal electricity
supply to it has failed, must be provided to give warning of any fail-
ure in the system.
4
Assembly
This fan is shipped either assembled or in parts. Assembly instructions to
assemble the fan are shipped with the unassembled fans.
5
Installation
►
Before commencing installation
1. Check the fan after you have received it and make sure it has not been
damaged during transport.
2. Briefly rotate the impeller and/or motor shaft by hand to make sure they
rotate freely.
3. Check all the information on the rating plate and verify that this fan is
suitable for the intended application.
5.1
Mechanical
The fan must be installed into the ventilation duct using the duct wall
mounting supports provided. The duct wall mounting supports are designed to
accommodate a metric M8 bolt head for easy fastening of the duct wall
mounting support to the duct.
WARNING! The motor supports must always be secured in
the duct wall mounting supports with the bolts and nuts
provided.
Pictured in the front of these instructions is how to install the fan into the
ventilation duct. [
