multicomp pro MP720021, Руководство пользователя

Страница: 91 / 154

User Manual
86
7.
Long press the button to power on the instrument.
How to Measure Automatically
Push the Measure button to display the menu for the settings of the Automatic
Measurements. At most 8 types of measurements could be displayed on the bottom
left of the screen.
The oscilloscopes provide 31 parameters for auto measurement, including Period,
Frequency, Mean, PK-PK, RMS, Max, Min, Top, Base, Amplitude, Overshoot,
Preshoot, Rise Time, Fall Time, +PulseWidth, -PulseWidth, +Duty Cycle, -Duty
Cycle, Delay A→B
, Delay A→B
, Cycle RMS, Cursor RMS, Screen Duty,
Phase A→B , Phase A→B , +PulseCount, -PulseCount, RiseEdgeCnt,
FallEdgeCnt, Area, and Cycle Area.
The "Automatic Measurements" menu is described as the following table:
Function Menu Description
Add
Meas Type
(left menu)
Select the measure types
Source
CH1 CH2
CH3 CH4 Select the source
Add
Add the selected measure types (shown at the left
bottom, you could only add 8 types at most)
Remove
Meas Type
(left menu)
Select the types need to be deleted.
The selected type and source are shown in the
Remove menu on the right.
Remove Remove the selected measure type
Remove All Remove all the measures
Snapshot
ON
OFF
Show all the measures of the snapshot source
Turn off the snapshot
Source
CH1
CH2
CH3
CH4
Select the snapshot source
Measure
Only if the waveform channel is in the ON state, the measurement can be performed.