multicomp pro MP700499, Руководство пользователя

Страница: 8 / 51

8
Usage Notes
Installation environment

Operating temperature and humidity ranges
0°C to 40°C 80%RH or less (no condensation)

Storage temperature and humidity ranges
23 ±5°C 80%RH or less (no condensation)
Installing the instrument in inappropriate locations may cause a malfunction of instrument or may
give rise to an accident. Avoid the following locations.

Exposed to direct sunlight or high temperature

Exposed to corrosive or combustible gases

Exposed to water, oil, chemicals, or solvents

Exposed to high humidity or condensation

Exposed to a strong electromagnetic field or electrostatic charge

Exposed to high quantities of dust particles

Near induction heating systems (such as high-frequency induction Heating systems)

Susceptible to vibration
Checking before use
Before using the instrument the first time, verify that it operates normally to ensure that no
damage occurred during storage or shipping. If you find any damage, contact your authorized
Multicomp-Pro distributor or reseller.
Before using the instrument, check that the coating of the test leads or cables are
neither ripped nor torn and that no metal parts are exposed. Using the instrument
under such conditions could result in electrocution. Contact your authorized
Multicomp-Pro distributor or reseller in this case
Handling Precautions
Do not modify, disassemble, or repair the instrument. This may result in fire, electric
shock accident, or injury.
Do not place the instrument on an unstable or slanted surface. It may drop or fall,
causing injury or instrument failure.
To avoid corrosion and/or damage to the instrument due to battery leakage, remove
the batteries from the instrument if it is to be kept in storage for an extended period.
Be sure to turn the power off after using it.
To avoid electric shock accident and short circuit, please operate the instrument as
following:
Do not test the voltage over 60 VDC