multicomp pro MP700499, Руководство пользователя

Страница: 16 / 51

16
2.2 Installing/Replacing Alkaline Batteries
Before using the instrument for the first time, load the eight alkaline batteries (LR6) or the lithium
rechargeable battery. Before measurement, check that the instrument has sufficient remaining
battery power. If the remaining battery level is low, replace the batteries. See the battery indicator
to check the remaining battery level.

Do not short circuit, charge, disassemble, or incinerate batteries. Doing so may cause an
explosion and is dangerous.

To avoid electric shock accident, remove any test leads before replacing batteries.

After the replacement, be sure to reattach the cover.

Poor performance or damage from battery leakage could result. Observe the cautions listed
below.

Do not use both old and new batteries or different types of batteries together.

Be careful to observe battery polarity. Otherwise, poor performance or damage from battery
leakage could result.

Do not use batteries after their recommended expiry date.

Dispose of batteries in accordance with local regulations.

When the remaining battery indicator is lit, the battery becomes low. Charge or replace the
batteries as soon as possible.
Replacing the battery steps:
1. Turn the power off. Remove any test leads.
2. Remove the battery cover on the back for the instrument.
3. Load the LR6*8 batteries or the lithium battery. Be careful of their polarity.
4. Reattached the battery cover on the back of the instrument.