MI
57
Innovation. Quality. Performance. Best in Industry. Worldwide.
Focus Test
The Focus Test function is used to verify the laser focus accuracy. The test will start at the current X,Y,Z location,
so operators should Jog the head assembly to the desired position before starting the test.
1. Press
Menu
to access the menu system.
2. Press
X-axis Jog Arrows
until Utility is highlighted in blue.
3. Press
Enter
to access the Utility sub-menu.
4. Press
X-axis Jog Arrows
until FocusTest is highlighted in blue.
5. Press
Enter
to begin the Focus Test routine.
6. Enter the first Z Step Distance using the number keypad (e.g., 0.050) and press
Enter
.
7. Enter the second Z Step Distance using the number keypad (e.g., 0.010) and press
Enter
.
8. Press
Start
to begin the Focus Test. If multiple bright sparks appear, operators should lower Power.
a. The laser will fire 10 times decrementing the lens height between shots per the “1st Z Step Dist.” value,
and the operator will then choose the brightest spark of the group and enter the number at the prompt.
b. The laser will then repeat the same test using the “2nd Z Step Dist.” value, and the operator will
choose the brightest spark of that group and enter the number at the prompt.
Routers * Lasers * Plasma * WaterJets * Knife Cutters
www.MultiCam.com v. 11 10
