E-Spray Hand Held
Electrostatic Sprayer
600 Cardigan Road
Shoreview, Minnesota 55126
Phone 651-481-1900
www.multi-clean.com
Operation instructions
To use the sprayer in the electrostatic mode, slide ON/OFF switch to
ON. In the OFF position, the unit will not apply a charge to the spray.
Fig 4
Battery must be fully charged, insert into battery socket.
Engage trigger lock by pressing black button above trigger. This will
disable equipment from turning on while setting up. Fig 1
Insert filled tank into sprayer, rotate tank lock dial to secure tank to
sprayer. Release trigger lock.
Spray objects to be cleaned with a sweeping motion back and forth,
for best results, spraying surfaces between 2 and 5 feet works best.
Spray walls using a spray width of 5 feet. A wall 8 feet tall will take
approximately 10 seconds to cover. Moving slower will result in
streaking of product.
Rotate tank lock dial to unlock tank from sprayer. The white arrow will
indicate lock or unlocked. Fig 2
While pulling tank release ring, grasp tank and pull downwards. Fig 3
Fill tank with 33 ounces of ready to use solution. You can use a wall
mount dilution control center or a buddy jug for fast filling.
Page 1 004509-01072020
FIG 1
FIG 2
FIG 3
FIG 4
Warranty
Warranty: 1 year parts and labor
Contact Multi-Clean for troubleshooting assistance.
Phone no. 651-481-1900
Warranty Claims: To file a warranty claim, contact the warranty administrator
directly. Phone no. 800-741-7788
Email: [email protected]
Be prepared to provide date code and serial number located in the battery
compartment and where the unit was purchased.
Maintenance
After Each use:
1.
Empty solution container.
2.
Re-Fill with warm water.
3.
Spray the unit for a minimum of 10 seconds.
4.
Empty container and stow in carrying case.
Monthly
1.
Remove nozzle using the nozzle wrench
2.
Rinse with cool water.
3.
Soak in acidic delimer solution for 1 hour.
Alternately, soak in white vinegar for 1 hour.
