tint-STARTER SET
INSTRUCTION MANUAL
61
Set brightness
Short-press to select permanently stored brightness
levels:
100%, 80%, 50%, 20%, 10% and 5%.
Long-press to set the desired brightness on a continuous scale.
Scenes
‘Scenes’ are pre-defined light settings.
Activate a scene by short-pressing the corresponding button on the
remote control.
“Working light” scene: 100% neutral, bright light
“Sunset” scene: Starts at warm-white light (50%) and then dims
further after
15 minutes. After another 10 minutes, the light switches off.
“Party” scene: Starts a bright and constantly changing sequence of
colours.
“Night light” scene: Warm-white light dimmed to 5%.
“Campfire” scene: Simulates a campfire in warm colour tones,
changing between orange, red and white.
“Romantic” scene: A constant cycle between the colours red, pink
and purple.
