tint-STARTER SET
60
INSTRUCTION MANUAL
• You do not need to “aim” at the bulbs with the tint remote control to operate
them.
• The tint remote control will also penetrate solid materials such as walls,
doors and windows.
• The maximum range (depending on the obstacles between the tint remote
control and the bulbs) is approx. 30 metres in the open air.
• Each button press will be confirmed by the feedback display lighting up.
Basic functions
Switching on/off
Press the standby button to switch the bulbs on and off again. The memory
function will store the last “illumination state” and will start again automatically
the next time the bulb is switched on.
Set colours
Press one of the four pressure points (fig. 4) to select the
desired colour:
Short press:
The colour will switch in the desired
direction on the colour scale.
Long press:
The colour will jump to a permanently
stored colour value.
Set white tone
Short-press to select permanently stored white tone
settings: warm white, neutral white and cold white.
Long-press to set the desired white tone from a continuous scale that
reaches the super-warm white range.
fig. 4
