6
Configuration of the terminal
Diagnostics
26
V7.20210115
30322507-02-EN
Symbol for the respective device type
ISO name
Manufacturer
CAN bus address
Deleting the object pool
Each job computer that is connected to the ISOBUS copies the images, texts and other objects used
in its software onto the terminal. These files are collectively referred to as object pool.
Since the memory on the terminal is limited, it is sensible to delete the object pools for job computers
that are not in use.
To delete an object pool:
1.
On the start screen, press:
>
2.
Select the device for which you want to delete files from the terminal memory.
3.
- Delete the files.
- Alternatively, delete all of the object pools at the same time.
⇨
A message appears.
4.
- Confirm.
6.5.2
Procedure
