6
Configuration of the terminal
Diagnostics
24
V7.20210115
30322507-02-EN
The joystick and ISOBUS job computer are connected.
1.
On the start screen, press:
2.
- Select whether you want to make the assignments directly by pressing the buttons on
the joystick or through the terminal.
⇨
In the upper area of the screen, you can see the assignment mode:
- Assignment is performed directly by pressing the buttons on the joystick.
- Assignment is performed through the terminal.
3.
- Optionally, you can delete all of the current button assignments.
4.
Search for the job computer function that you want to assign to a button, for example:
.
5.
If the function has not yet been assigned to a button, select the joystick to which you want to
assign the function, for example:
.
6.
Press on the current button assignment, for example:
. If there is no button assignment yet
for the function, press:
.
7.
Select the desired new button assignment, for example:
.
8.
Repeat this procedure for all desired assignments.
9.
- Exit the screen to save the assignments.
⇨
You have completed the assignments and can now operate the machine with the joystick.
Diagnostics
On this screen, you are given diagnostics information regarding the terminal.
Moreover, the screen shows detailed information on the devices connected to the bus.
On the start screen, press:
The following function icons appear on the screen:
Function icon
Meaning
Switches back to the previous screen.
Switches to the screen with the diagnostics data for the connected devices.
Procedure
6.5
Path
Controls
