Basic control principles
Switching on the job computer
5
30322453-02-EN
V4.20191001
23
Basic control principles
Switching on the job computer
1.
Connect the ISOBUS cable of the job computer to the ISOBUS connector on the tractor.
2.
Start the ISOBUS terminal.
⇨
The job computer is started together with the terminal.
⇨
When starting up for the first time, the job computer initially has to transmit lots of
information to the terminal. This can take a few minutes.
⇨
When all of the data from the job computer application has been loaded, their icon appears
on the terminal:
.
3.
Open the job computer application. To do so, follow the instruction for the ISOBUS terminal.
⇨
The work screen of the job computer appears.
Layout of work screen
The work screen is the first screen that appears when the application is opened. During operation,
the work screen always appears in the foreground and contains the most important information on the
work and the status of the slurry tanker.
The work screen is divided into 3 areas.
Area 1
Information on the speed, application rate and fill level
Area 2
Information on the statuses, activated functions, etc.
Area 3
Information on the pressure, flow rate, pump speed, activated functions, etc.
The information and number of icons in each area depends on the equipment and activated functions
of the slurry tanker.
Area 1
▪
- The current application rate.
5
5.1
Procedure
5.2
