muli Muskel страница 14 Скачать руководство пользователя

Страница: 14 / 59

On the axles of the pedals there is a small marking for the side assignment. „R“

stands for right, „L“ for left. Note that the left pedal has a left-hand thread and

must be screwed counterclockwise into the crank.

Grease the pedal thread with commercially available assembly grease and screw

it into the corresponding crank arm by hand. Make absolutely sure that you do

Mounting the pedals

Check the tightness of the pedals after 100km of driving.

Make absolutely sure that you do not tilt the pedal when screwing

it in. A pedal that is screwed in at an angle can cause massive

damage to the thread.

not tilt the pedal when screwing it

in. A pedal that is screwed in at an

angle can cause massive damage to

the thread. Then tighten the pedals

with a 15 mm open-end wrench if the

pedal has external hex nuts, or with

a 6 mm Allen wrench if your pedal

has an internal hex bolt. The corre-

sponding torques can also be found

listed in the „Recommended screw

torques“ section.

Mount the included bell at the desired position on the handlebar. Mount the bell

so that you can reach it very quickly with your thumb without having to take your

hand off the handle.

Mounting the bell

Before you take your e-muli for the first ride after the assem-

bly has been completed, be sure to read the chapter „Before

the first ride“ carefully and implement all instructions contai-

ned therein.

Pull the muli out of the box extremely carefully to prevent

scratches from occurring.

Check the bolts and nuts on the steering linkage before

each ride. Loosening these connections while driving can

lead to serious falls and life-threatening injuries.

Assembly instruction

Содержание Muskel




























































Результаты поиска

Содержание Muskel

Отзывы:

Похожие инструкции для Muskel

Бренды по названию

Популярные бренды

muli Muskel, Руководство пользователя

Результаты поиска

Содержание Muskel

Отзывы:

Похожие инструкции для Muskel

Бренды по названию

Популярные бренды