MTU Detroit Diesel 12 V 2000 P62, Техническая публикация

Страница: 67 / 208

Maintenance 63
4.3 Maintenance tasks
Interval Qual-
ifica-
tion
[hours] [years]
Item Maintenance tasks Task
QL1
-
2
Engine oil filter Replace engine oil filter when changing the oil or when the
interval/years is reached, at the latest ( → Page 130).
W1008
QL1 Daily
-
Engine operation Check engine oil level ( → Page 53). W0500
Visually check engine for leaks and general condition ( → Page 53). W0501
Check intercooler drain (if fitted) ( → Page 53). W0502
Check signal-ring position of service indicator on air filter ( → Page 53). W0503
Check relief bores of water pump(s) ( → Page 53). W0505
Check engine for abnormal running noises, exhaust color and
vibrations ( → Page 53).
W0506
Drain water and contaminants from fuel prefilter (if fitted) ( → Page 53). W0507
Check reading on vacuum gauge of fuel prefilter (if fitted) ( → Page 53). W0508
QL1
500 2
Fuel filter Replace fuel filter or fuel filter element ( → Page 112).
W1001
QL1 2,000
-
Valve gear Check valve clearance. ATTENTION! First adjustment after 1,000
operating hours! ( → Operating Instructions) ( → Page 98)
W1207
QL1 4,000
-
Fuel injectors Replace injectors ( → Page 105). W1006
QL1 4,000
-
Combustion chambers Perform endoscopic examination ( → Page 92). W1011
QL1 6,000
-
Fuel injection pump(s) Replace fuel injection pump(s) ( → Page 101). W1007
QL3 8,000
-
Component maintenance Before starting maintenance work, drain coolant and flush coolant
circuits.
W2000
Clean air pipework ( → Workshop Manual). W2002
Clean intercooler and check for leaks ( → Workshop Manual). W2003
Check centrifugal oil filter for wear (if fitted) ( → Workshop Manual). W2009
Check vibration damper ( → Workshop Manual).
W2011
Replace diaphragm of crankcase breather ( → Workshop Manual). W2014
Clean engine oil heat exchanger and check for leaks ( → Workshop
Manual).
W2018
Check engine alignment ( → Workshop Manual). W2036
Clean fuel cooler ( → Workshop Manual). W2059
Replace thermal actuator of coolant thermostat ( → Workshop Manual). W2073
Check rocker arms, valve bridge, pushrods and ball joints for wear
( → Workshop Manual).
W2074
Overhaul exhaust turbochargers ( → Workshop Manual). W2075
Replace seals of all disassembled components ( → Workshop Manual). W2062
Overhaul engine coolant pump.
W2110
QL3 8,000
-
Cylinder head Overhaul cylinder heads, inspect piston crowns and running pattern
of cylinder liners ( → Workshop Manual).
W1063
MS15009/00E 06-09 © MTU