manualshive.com logo in svg

MTU 20V4000M93 series, Руководство по эксплуатации

Поделиться
Скачать
MTU 20V4000M93 series Скачать руководство пользователя страница 198

7.14.8 Automatic oil filter – Installation

Preconditions

☑

Engine is stopped and starting disabled.

Special tools, Material, Spare parts

Designation / Use

Part No.

Qty.

Assembly compound (Kluthe Hakuform 30-15)

X00067260

1

Engine oil
O-ring

(→ Spare Parts Catalog)

DANGER

Suspended load.
Danger to life!
• Use suitable equipment and lifting devices.
• Never stand beneath a suspended load and keep a safe distance.
• Wear personal protective equipment (e.g. protective helmet, safety shoes).

WARNING

Heavy part, risk of falling or overturning due to lack of stability.
Risk of crushing body or limbs!
• Use appropriate lifting gear and appliances.
• Wear safety shoes.

WARNING

Oils/oil vapors are combustible/explosive.
Risk of fire and explosion!
• Avoid open flames, electric sparks and ignition sources.
• Do not smoke.

NOTICE

Ingress of contamination from automatic oil filter in the engine oil system.
Severe engine damage possible!
• Remove the automatic oil filter before changing the oil filter candles.
• Keep everything scrupulously clean when performing maintenance and repair work.
• Cover all exposed openings when opening assemblies.

NOTICE

Incorrect installation of components and lines.
Damage to component!
• Ensure that components/lines are installed so that they are never under tension or strain.
• Ensure correct installation position of components.

NOTICE

Contaminated components.
Risk of damage to component!
• Check components for special cleanliness and clean if necessary.

196 | Oil Filtration / Cooling | MS150048/05E 2018-03

TIM-ID: 0000071169 - 002

Содержание 20V4000M93 series




















































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды