MTU 12 V 4000 G21R Скачать руководство пользователя страница 73

Страница: 73 / 117

7.9 Charge-Air Cooling

7.9.1 Intercooler – Check drain for coolant leakage and obstruction

DANGER

Unguarded rotating and moving engine components.

Risk of serious injury – danger to life!

• Take special care when working on a running engine.

WARNING

Engine noise above 85 dB (A).

Risk of damage to hearing!

• Wear ear protectors.

WARNING

Compressed air

Risk of injury!

• Do not direct compressed-air jet at persons.

• Wear protective goggles / safety mask and ear protectors.

Intercooler – Check drain for

coolant leakage and obstruction

Verify that air emerges from condensate

drain bore(s) on left and right engine sides

at driving end when engine is running. If no

air emerges:

• Clean drain bore(s)

• Blow out with compressed air

If a large amount of coolant is continuously

discharged, the intercooler is leaking. Con‐

tact Service.

Emergency measures prior to engine start with a leaking intercooler

Remove injectors (→ Page 78).

Bar engine manually (→ Page 63).

Crank engine on starting system to blow out combustion chambers (→ Page 64).

Install injectors (→ Page 78).

92 | Task Description | MS150064/01E 2011-11

TIM-ID: 0000000955 - 002

Содержание 12 V 4000 G21R






















































































































Результаты поиска

Содержание 12 V 4000 G21R

Отзывы:

Похожие инструкции для 12 V 4000 G21R

Бренды по названию

Популярные бренды

MTU 12 V 4000 G21R, Руководство по эксплуатации

Результаты поиска

Содержание 12 V 4000 G21R

Отзывы:

Похожие инструкции для 12 V 4000 G21R

Бренды по названию

Популярные бренды