MTU 12 V 4000 G21R Скачать руководство пользователя страница 57

Страница: 57 / 117

7.5 Injection Pump / HP Pump

7.5.1 HP pump – Relief bore check

DANGER

Unguarded rotating and moving engine components.

Risk of serious injury – danger to life!

• Take special care when working on a running engine.

WARNING

Engine noise above 85 dB (A).

Risk of damage to hearing!

• Wear ear protectors.

Checking HP pump relief bore

Check relief bore for oil and fuel discharge

by visual inspection.

If relief bore is contaminated, stop the en‐

gine, disable engine start, and clean relief

bore.

Note the following in case of fluid dis‐

charge:

• Heavy discharge means continuous dis‐

charge of fluids (leakage). Contact Serv‐

ice.

• Minor discharge of fluids up to 10 drops

per day is normal (moistening) and not

considered a leakage.

76 | Task Description | MS150064/01E 2011-11

TIM-ID: 0000000924 - 004

Содержание 12 V 4000 G21R






















































































































Результаты поиска

Содержание 12 V 4000 G21R

Отзывы:

Похожие инструкции для 12 V 4000 G21R

Бренды по названию

Популярные бренды

MTU 12 V 4000 G21R, Руководство по эксплуатации

Результаты поиска

Содержание 12 V 4000 G21R

Отзывы:

Похожие инструкции для 12 V 4000 G21R

Бренды по названию

Популярные бренды