IFU
(Instruction for Use)
Dokukennung_Titel_Revision (Code_Titel_Revision)
MTS_OW100_IFU_Quick-Guide_E_A
OW100 QUICK USER GUIDE
Ausgabedatum (Date of Release)
(TT.MM.JJ)
19.04.2016
Seite (Page)
1 / 4
Attention: The Instruction for Use OW100 Part 1 and Part 2 belongs to this document and has to be observed
Starting your device OW100
®
•
Standby mode will be started after switch on the power switch of the device.
•
To switch
ON
the device, keep the yellow button press until device starts.
Operational Procedure:
1. Switch “
ON
” device.
2. Attach water cartridge to device.
3. Plug applicator to device.
4. Press “
FILL”
Button” to fill the Applicator.
5. Set up “Treatment Parameters”.
6. Start treatment.
7. Stop treatment.
8. Press “
DRAIN”
button” to drain water from applicator.
(Lift up applicator to drain completely all water from applicator lines).
9. Press “
SETUP
” button to go to SETUP Screen.
10. Press “
CARTRIDGE
” button to eject cartridge.
11. Press “
APPLICATOR
” button to remove applicator from device.
12. Press “
BACK
” button to return to Main Screen.
13. Press “
Yellow
” button until device switches off.
14. Switch the power switch off to turn off completely your OW100®
Shockwave device.
Step 1
Switch On
device
Step 2
Attach Cartridge
Step 3
Plug Applicator
