Series 111 Accumulators
Introduction
5
Introduction
The Series 111 Accumulator stabilize the hydraulic lines in your system.
There are two models availlable:
•
The Model 111.11B Accumulator is a boss port-mounted accumulator
that requires a boss adapter fitting for mounting.
•
The Model 111.12C Accumulator is bolt-mounted to a flange and
typically has a larger nitrogen gas capacity than the Model 111.11B.
Contents
What you need to
know
MTS Systems Corporation assumes that you know how to use your
controller. See the appropriate manual for information about performing
any controller-related step in this manual’s procedures. You are expected
to know how to perform the following procedures:
•
Turning hydraulic pressure on and off
•
Selecting a control mode
•
Manually adjusting the actuator position
