background image

RAPIDDOC

®

 LITE KIOSK 

INSTALLATION GUIDE

1

 MTI P/N 063-00216 rev C ©2021 MTI All Rights Reserved

www.MTIGS.com  |  T:801.653.3807

Overview

185-00528 Through-Hole Mounting Accessory (Sold Separately)

Materials in Box

Mounting  

Plate

Alcohol Wipes (10)

Mounting Screws (4)

Screws (5)

Threaded Pipe

Adhesive Pad

Nut

Security Screws (2)

185-00461

Power Supply

Red Handle Tool

Authorization Card

If lost or 

stolen, contact 

customer 

service for 

replacement.

Access Card (5)

RapidDoc

®

 Kiosk

C.A. Cover  

(Minimal Cables)

C.A. Cover  
(No Cables)

Cable Access  

(C.A.)

If the Kiosk is not mounted to a counter 

or table it may fall, causing damage to 

the Kiosk or a person. USB cables may 

be disconnected as it moves around 

a surface. See page 9 for mounting 

instructions. 

The applied nameplate is located at the 

bottom of the product. 

Use only power supply with output ratings 5.6VDC max., 4A 

max., of PS2 or LPS 

The socket-outlet (power adaptor) shall be installed near the 

EQUIPMENT and shall be easily accessible. 

-CONTROLLED DOCUMENT-

063-00216

C-0

Status: Approved

ECO-112352

ECO-112352

Содержание RAPIDDOC












Отзывы: