manualshive.com logo in svg

MTI Freedom ReAct Interactive, Руководство по эксплуатации продукта, Страница: 14 / 30

Поделиться
Скачать
MTI Freedom ReAct Interactive Скачать руководство пользователя страница 14

Freedom ReAct

14

Performing Action Tasks

The Action tab provides access to the following tasks: 

Sync Config/Media/Log

: Use to update media content and the configuration file (see page 18).

Touch Screen Calibration

: Select this option and perform the following steps to calibrate the touch screen:

1.  When the ‘Touch Screen Calibration’ menu item is selected, a screen appears with a marker in the upper left corner.  

 
 
 
 
 
 
 
 

2.  Place finger on marker for 2 seconds, then remove. The marker moves to the bottom left corner of the screen. 

3.  Place finger on marker for 2 seconds, then remove. The marker moves to the bottom right corner of the screen. 

4.  Place finger on marker for 2 seconds, then remove. The marker moves to the upper right corner of the screen. 

5.  Place finger on marker for 2 seconds, then remove. The marker moves to the center of the screen. 

6.  Place finger on marker for 2 seconds, then remove. The screen is now calibrated. Touch screen anywhere to exit.

Audio Codec Update

: Use to update the WMA (Windows Media Audio) codec. This is only needed for serial numbers lower 

than M504-110112-xxxxxxxxxxxx. Requires an Internet connection.

Restore Factory Default

: 

Use to restore all settings to the factory defaults. The player automatically reboots when this item is 

selected. The following settings are reset when restoring to the factory default:

Firmware Upgrade

: Use to update the firmware (see next page).

Diagnostic

: Do not select as this is for production-line testing use only. If you select this option, you must recycle the power to 

exit the diagnostic routine.

Burnin Test

: Do not select as this is for production-line testing use only. If you select this option, you must recycle the power to 

exit this test.

Marker

Network Settings

Lan

Address Type     Dynamic               

    IP Address         0.0.0.0
    Net Mask           0.0.0.0
    DNS                   0.0.0.0
    Gateway             0.0.0.0
 

Other Settings

Language           English  
Local Mode         True  

Terminal ID          (will be blank)           

GMT Zone           -0800

    Sync Network Date Time     Yes
    Date = last value if not connect to Internet
    Time = last value if not connect to Internet
 

AV Settings

Video

Output               Auto

    Format             NTSC
    Aspect Ratio     16:9
 Audio
    Output            PCM 2.0

Содержание Freedom ReAct Interactive































Отзывы:

Нет отзывов