MTI Freedom ReAct Interactive, Руководство по эксплуатации продукта, Страница: 13 / 30

Freedom ReAct
WiFi (Wireless Connection)
If you are using a compatible wireless network adapter (see page 23), the player automatically detects the adapter and displays
a Wifi sub-menu. Use this sub-menu to configure the following wireless network settings with information provided by your IT
department:
Scan: Press to search for available wireless networks. When complete, the Scan button becomes a drop-down box. Use it to
select the desired network.
SSID:
This will automatically populate when the desired network is selected from the drop-down box.
Authentication:
This will also populate automatically.
Secret Key: Enter the security key for the selected network.
Address Type: Choices are Dynamic (default) or Static. If Dynamic is selected, player obtains IP automatically. If Static is
selected, you must set up the IP parameters listed below manually. The player must be rebooted after the static addresses are
entered.
IP Address:
Enter IP address (e.g., 192.168.000.002).
Net Mask: Enter 255.255.255.000 or other correct mask.
DNS: Enter network DNS IP address.
Gateway: Enter IP of router or other directly connected device (e.g., 192.168.000.001).
Connect:
If dynamic addressing is selected, first clear any existing addresses by briefly unplugging the WiFi adapter and waiting
until the Wifi menu disappears. When it is plugged back in, the SSID and Secret Key are remembered. Press Connect when
the Wifi menu re-appears. It may take a minute or so for the new IP addresses to populate after pressing Connect.
Note: If the WiFi connection does not establish, it may be necessary to reboot the player.
13