MTI Freedom ReAct Interactive Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 30

MTI Freedom ReAct Interactive Скачать руководство пользователя страница 10

Freedom ReAct

3.3 Using the Remote Control or USB Keyboard

A remote control is not required for normal operation of the player. It is an optional accessory that can control several basic
player functions (e.g., mute and volume) and can also be used to configure the player and monitor. If you do not have a remote,

you can also configure the player by plugging a USB keyboard into one of the USB slots or by using touch points if connected to
a compatible touch screen. Basic remote control and keyboard functions are detailed below.

Setup button

Exits Setup mode. Use

Home

key if using USB keyboard.

Volume

Temporarily controls playback volume of current media playing.

Volume can also be controlled via GPI0 push buttons.

Text button

Use in Setup mode to close

the on-screen keyboard

Mute

Temporarily mutes current media file playing. Mute

can also be controlled via GPI0 push button.

Number/letter buttons

Example only - actual remote may vary in

color and layout. Remote buttons not called

out have no function on the ReAct player.

Navigation buttons

Use in Setup mode. Use arrow keys and

Enter

key if

using a USB keyboard.

3.4 Configuring the Player Using the Setup Menu

Overview

In most cases, the factory default settings are sufficient for basic operation and there is no need to configure the player. You may,
however, need to configure the player using the Setup Menu under the following conditions:

Player is connected to the monitor using the AV port. This is an analog interface that does not exchange resolution informa-
tion between the player and monitor. The player’s video output must be set to a specific resolution.

You want to use a different audio output format (e.g., PCM 5.1).

Player is connected to a wireless network. You must configure the player’s wireless settings.

Player is connected to a touch screen.

10

«
...
8
9
10
11
12
...
»

Содержание Freedom ReAct Interactive































Отзывы:

Нет отзывов