SECURE PLUG
™
PRODUCT MANUAL
8
MTI P/N 063-00243 rev D ©2019 MTI All Rights Reserved
www.mobiletechinc.com | T:800.426.6844
Visual Reference
System Status
Condition
Solution
1. LED flashes twice and then
stops
2. LED is flashing green
continuously.
1. Socket calibrated
2. Factory Reset
1. Plug in your device to the power supply.
2. Link an Authorization Card.
LED is solid blue.
1. Setup mode - no beeps.
2. Overcurrent - continuous
sequence of 5 double beeps.
1. System is in key setup mode. Follow key
setup process to add User Keys.
2. System has gone into overcurrent
protection. Unplug any product which
may be drawing too much power.
LED is flashing yellow.
1. Ready to be Armed without
MTI Connect Mesh Connected
2. Merchandising Calibration
without MTI Connect Mesh
Connected
1. Add Secure Plug unit to Mesh network.
2. System is calibrating product, wait until
successful or unsuccessful merchandising
before proceeding.
LED is solid yellow.
1. Armed without MTI Connect
Mesh Connected
2. Delete Keys Mode (If using
Authorization Card)
1. Add Secure Plug unit to
Mesh network.
2. System is deleting associated keys. Wait
until complete.
LED STATUS INDICATORS
-CONTROLLED DOCUMENT-
063-00243
D-0
Status: Approved
ECO-109326
ECO-109326
