MTE SineWave Nexus Скачать руководство пользователя страница 23 | Manualshive

Страница: 23 / 37

MTE SineWave Nexus Скачать руководство пользователя страница 23

SineWave Nexus™ Technical Reference Manual 380V - 600V

19

Form: SWN-TRM-E February 2020 REV. 001

Power Wiring Connection

Verify that the power source to which the filter is to be connected is in agreement with the

nameplate data on the filter. A fused disconnect switch or circuit breaker should be installed

between the drive and its source of power in accordance with the requirements of the NEC and all

local electrical codes and regulations. Refer to the drive user manual for selection of the correct

fuse rating and class.

The typical interconnection diagrams that follow are shown for a motor load, but the load can be

either a motor or a transformer.

•

For modular filter applications, interconnection between the filter, its power source, the

capacitor(s), the common mode assembly and the drive is shown in Figure 5-1: Modular

Interconnection

.

•

For filters supplied in general purpose NEMA 1/2 & NEMA 3R cabinets, interconnection

between the filter, its power source, the motor, and the drive is shown in Figure 5-2:

Enclosed Interconnection

.

•

For transformers, interconnection between the power source, the filter, the motor and the

drive is shown in Figure 5-4: Transformer Diagram

.

Wire gauge range and terminal torque requirements as well as selecting conductors that

interconnect the reactor, capacitor(s) and common mode assembly are shown in Table 5-2: Torque

Ratings 380-480V

and Table 5-3: Torque Ratings 600V

.

Refer to the drive user manual for instructions on interconnecting the drive and motor and the

correct start-up procedures for the drive.

The filter is designed for use with copper conductors with a minimum temperature rating of 75

degrees C.

WARNING

Input and output power wiring to the filter should be performed by authorized

personnel in accordance with the NEC and all local electrical codes and

regulations.

Cable lugs and mounting hardware are provided by the customer.
Any extremely low or high resistance readings indicate miswiring and may

result in damage to filter components if not corrected.
On NEMA 3R enclosures, CAB-26AP and larger, no live parts shall be mounted

below 8 inches from the bottom of the enclosure.

«
...
21
22
23
24
25
...
»

Содержание SineWave Nexus






































Отзывы:

Нет отзывов