background image

Operating Manual

English

11

Note

Be particularly careful when 

reversing. Never change the 

direction of travel without first 

bringing the unit to a standstill.

Start the engine as indicated.

Release the parking brake. Press 

down fully the brake pedal, and 

release it.

Slowly engage the drive pedal 

until you have reached the speed 

you want.

Note

The forwards and reverse accele-

rator pedal must not be used if the 

brake pedal is depressed. This may 

damage the gears.

Stopping the unit

Release the accelerator.

Depress brake pedal until the 

unit stops.

Mowing

Note

– In normal mowing mode 

/

 (see Operation, 

ignition lock): Before reversing 

the machine, switch off and raise 

the cutter deck.

– In reverse mowing mode 

 (see Operation, 

ignition lock): Exercise extreme 

caution when reverse mowing 

and do not activate unless 

absolutely necessary.

– Do not change direction when the 

appliance is coasting or driving.

Start the engine as indicated.

To ensure adequate power 

output, move the throttle to 

.

Switch on the cutter deck.

Lower the cutter deck.

Release the parking brake.

Press down fully the brake pedal, 

and release it.

Slowly depress the forward drive 

pedal for forward direction of 

travel and speed. The appliance 

starts moving.

Information on PTO switch

When the safety lock system has 

automatically switched OFF the 

appliance (e.g. when reversing with 

activated cutters), first switch ON 

and then OFF the PTO switch to 

release the lock on the clutch.

General information

When adjusting the cutting height 

and driving speed, ensure that the 

machine is not overloaded. 

Depending on the length, type, and 

dampness of the grass it may 

become necessary to adjust the 

cutting height and appliance speed 

for the optimum grass catcher 

performance. 

If blockages occur, reduce the 

driving speed and increase the 

cutting height.

The best way to mow

Cut the first two rounds so the cut 

grass is thrown out sideways into 

the middle.

Never allow the grass to grow too 

long

Never cut the grass too low.

Drive in a straight line.

Never mow at high speed, 

particularly when a mulching kit 

or grass catcher is installed.

Mulching

Various appliances can also mulch 

when fitted with the corresponding 

accessories. Ask your specialised 

dealer for details.

Note

This appliance is designed to mow 

lawns. Do not mow scrub, weeds, 

or overlong grass.

Switching off the machine

Stopping the unit:

Release the accelerator press 

brake pedal until the appliance is 

stationary.

Switching off the cutter deck.

Set the throttle lever into the 

middle position.

Raise the cutters to the top.

After 20 seconds set ignition key 

to 

.

Engage the locking brake before 

leaving the appliance.

Close fuel tap.

Remove the ignition key.

Pushing the appliance

Fig. 13

Push the appliance only when the 

engine is switched OFF.

Release the parking brake.

Release both gears:

Pull out both gear 

release levers and 

press to the right.

Before starting the engine move 

back the two gear release levers to 

their home positions.

Note

Never tow the appliance. 

This can cause serious damage to 

the gears.

Tips on lawn care

Mowing

A lawn is made up of various 

different types of grass. If you mow 

your lawn frequently, those types of 

grass which form strong roots and 

a firm turf surface will grow better. If 

you seldom cut the grass, you will 

enhance the development of high-

growing types of grass and other 

weeds, such as clover, daisies ...).

The normal height of a lawn is 

approx. 4–5 cm. Only 

1

/

3

 of the total 

height should be mown; therefore 

cut 7–8 cm long grass to normal 

height. 

Preferably do not cut the lawn 

shorter than 4 cm, otherwise the 

sward will be damaged in a dry 

period. If the grass has grown 

particularly high (for example, 

during a holiday period), cut it back 

to its normal height in several 

stages.

Mulching using the accessories 

(optional)

During mowing the grass is cut into 

small pieces (approx. 1 cm) and is 

left on the ground. A lot of the 

nutrients in the cut grass are 

retained for the benefit of the lawn. 

Please note the following:

Do not mow wet grass.

Never mow more than max. 2 cm 

of the total grass length.

Drive slowly.

Use maximum engine speed

Clean the mower cover regularly.

Содержание Cub Cadet



















Отзывы: