MTD 790 TB-TrimmerBlower Скачать руководство пользователя страница 8

Operating instruction

English

5

Operating the unit

n

Never start the unit and never 
leave it running in a closed room 
or building. The inhalation 
of exhaust gases may be fatal. 
Use the unit outdoors only.

n

Wear eye and ear protection when 
using the unit. If working in a dusty 
environment, wear a face or dust 
mask. A long-sleeved shirt is 
recommended.

n

Wear thick, long trousers , boots 
and gloves. Do not wear loose 
clothing, jewellery, short trousers, 
sandals and do not walk barefoot. 
Pin your hair above your 
shoulders.

n

The cutting attachment guard 
must always be attached when 
the unit is being used as a lawn 
trimmer. Both trim lines must 
be pulled out and the correct line 
must be installed. The trim line 
must not be pulled out over 
the end of the guard.

n

The unit has a clutch. The cutting 
attachment stops when the unit 
is running at no load. If it does 
not stop, have the unit adjusted 
by a mechanic at your authorised 
dealer.

n

Before switching on the unit, 
ensure that the line spool/cutting 
blade cannot strike an object.

n

Keep these instructions in a safe 
place!

n

Do not touch the cutting 
attachment on the unit.

n

Operate the unit in daylight 
or adequate artificial lighting only.

n

Avoid starting the unit 
unintentionally. Be ready to 
operate the unit when you pull the 
starter rope. User and unit must 
be in a stable position when the 
unit is started. Follow the Start/
Stop instructions.

n

Use this unit for its designated 
purpose only.

n

Do not stretch too far over the 
unit. Always have a secure footing 
and keep your balance.

n

When operating the unit, always 
hold the unit firmly with both 
hands.

n

Keep your hands, face and feet 
away from all moving parts. 
Do not touch the cutting 
attachment while it is rotating and 
do not attempt to stop it.

n

If extremely violent vibrations 
occur, switch off the engine 
IMMEDIATELY. Vibrations are 
a sign of problems. Check 
thoroughly for loose bolts, nuts 
or other damage before you 
continue cutting. If required, repair 
or replace the affected parts.

n

Do not touch the engine or 
muffler. These parts become very 
hot while the unit is being used. 
They remain hot for a short time 
even when the unit is switched off.

n

Do not let the engine run quicker 
than required for cutting or 
trimming of lawn edges. Do not 
run the engine at high speed when 
it is not cutting.

n

Always switch off the engine 
if you cannot start cutting 
immediately or if you are moving 
from one place to another.

n

If you strike or ensnare a foreign 
object, immediately switch off the 
engine and check whether the unit 
has been damaged. Never use 
the unit with loose or damaged 
parts.

n

Stop and switch off the engine 
for maintenance, repairs or when 
changing the cutting attachment 
or other attachments. Also pull out 
the spark-plug terminal.

n

Use only original spare parts 
for repairs. These parts can be 
purchased from your authorised 
dealer.

n

Never use parts, accessories 
or attachments which are not 
authorised for this unit. Otherwise, 
the user may be seriously injured 
and the unit damaged. In addition, 
your warranty may be deemed 
null and void.

n

Keep the unit clean and ensure 
that there are no plants or other 
objects caught between the 
cutting attachment and guard.

n

To reduce the risk of fire, please 
replace damaged mufflers and 
spark extinguishers and remove 
grass, leaves, excess lubricants 
and layers of soot from the engine 
and muffler.

n

Have all repairs carried out 
by a repair shop only.

Operating times

Observe the national/municipal 
regulations concerning times 
of use (if required, ask your local 
authority).

Other safety instructions

n

As long as the tank still has petrol 
in it, never store the unit in a 
building where vapours could 
come into contact with sparks or 
naked flames.

n

Leave the engine to cool down 
before transporting or conveying 
the unit. Attach the unit securely 
for transportation.

n

Store the unit in a dry condition, 
locked away or high up to prevent 
unauthorised use and damage. 
Keep the unit away from children.

n

Never douse or splash the unit 
with water or other liquids. Keep 
the handle bar dry, clean and 
dust-free. Clean the unit after 
each use and follow the 
instructions for cleaning and 
storage.

n

Dispose of waste petrol/oil or any 
packaging remnants in 
accordance with local regulations.

n

Keep this manual. Read 
it frequently and use it to instruct 
other users. If you lend this unit 
to somebody else, also include 
this manual.

Keep this manual in a safe place

Содержание 790 TB-TrimmerBlower
















Отзывы: