manualshive.com logo in svg

MTD 790 TB-TrimmerBlower, Руководство пользователя, Страница: 14 / 15

Поделиться
Скачать
MTD 790 TB-TrimmerBlower Скачать руководство пользователя страница 14

Operating instruction

English

11

Troubleshooting

If you have any further questions, please contact your authorised dealer on site.

All information, diagrams and specifications in these operating instructions are based on the latest product infor-
mation at the time of going to press. 

We reserve the right to make changes without prior notice. 

Error

Cause

Remedial action

Engine does not start.

Ignition switch set to OFF.

Set switch to ON.

Fuel tank empty.

Fill fuel tank.

Primer not depressed 
adequately.

Slowly and fully depress primer 10 x.

Engine flooded.

On appliances with a choke lever:
Implement the starting process with the 
choke lever in the operating position.

On appliances without a choke lever:
Press the throttle and pull the starter 
cable.

Old or incorrectly mixed fuel.

Empty the tank / fill with fresh fuel mixture.

Dirty spark plug.

Replace or clean spark plug.

Engine does not run constantly 
at no load.

Air filter blocked.

Clean or replace air filter

Old or incorrectly mixed fuel.

Empty the tank / fill with fresh fuel mixture.

Carburettor incorrectly 
adjusted.

Have carburettor adjusted by customer 
service personnel.

Engine does not accelerate.

Old or incorrectly mixed fuel.

Empty the tank / fill with fresh fuel mixture.

Carburettor incorrectly 
adjusted.

Have carburettor adjusted by customer 
service personnel.

Engine has no power or stops 
during cutting.

Cutting head entangled with 
grass.

Stop the engine and clean the cutting 
attachment.

Dirty air filter.

Clean or replace air filter.

Old or incorrectly mixed fuel.

Empty the tank / fill with fresh fuel mixture.

Carburettor incorrectly 
adjusted.

Have carburettor adjusted by customer 
service personnel.

Содержание 790 TB-TrimmerBlower
















Отзывы:

Нет отзывов