MTD 190-032, Руководство оператора

Страница: 11 / 24

11 s
ectiOn
3 — a
sseMbly
& s
et
-u
p
Routing The Upper Drive Belt
(Tractor Models with an Electric PTO)
Attach and route upper drive belt around spindle pulley and idler pulley found on undercarriage, electric PTO clutch and PTO 1.
idler pulley as illustrated in Fig. 3-18. Make sure that the belt is routed to the INSIDE of the belt keeper on the undercarriage idler
pulley and the remaining keeper pins found around the spindle pulley.
IMPORTANT: Make certain that the flat side of the belt is facing outward as it sits against both the electric PTO clutch and
spindle pulley. This allows the “V” side of the belt to ride snugly in both pulleys.
Routing the Upper Drive Belt
(Tractors Models with a Manual PTO)
Attach and route the upper drive belt around the engine pulley and spindle pulley, routed to the INSIDE of the PTO idler pulley 1.
on the undercarriage. Make sure the belt is routed inside of the belt keeper pins found around the spindle pulley and engine
pulley. See Fig. 3-19.
IMPORTANT:
Be certain flat side of belt is facing outward. This allows “V” side of belt to ride snugly in both pulleys.
Routing the Lower Drive Belt
(All Tractor Models)
Attach and route the lower drive belt around the lower pulley on the spindle assembly, both pulleys on the double-idler bracket 1.
found beneath the undercarriage, and the drive pulley found on the rear of the snow thrower housing as illustrated in Fig. 3-20.
Attach tension spring (found on undercarriage double-idler bracket) to the hex screw if it is not already attached. 2.
Spindle Pulley
Engine Pulley
PTO Idler Pulley
Spindle Pulley
Engine Pulley
PTO Idler Pulley
Spindle Pulley
Snow Thrower Drive Pulley
Undercarriage
Double-Idler Bracket
Right Side
Left Side
Figure 3-18
Figure 3-19
Figure 3-20