STEP 7:
Loosely attach the latch assembly (1) to the bottom side of the beam as shown in the diagram using the
two 1/2” x 1-1/4” GR 5 hex cap bolts (4), the two 1/2” lock washers (3) and the two 1/2” hex nuts (2). Lower
the beam onto the tongue. Center the latch assembly on the tongue and tighten hardware.
Page 11
ITEM NO. PART NO.
DESCRIPTION
QTY.
1
40127500
Beam Lock
1
2
O/L
1/2” Hex Nut
2
3
O/L
1/2” Lock Washer
2
4
O/l
1/2” x 1-1/4: GR5 Hex Bolt
2
STEP 8:
Remove the lid from the canister (2) holding the owner’s manual to the engine side of the tongue using three
1/4” x 3/4” Grade 5 hex cap bolts (4) and three 1/4” flat washers (3).
Page 10
1
2
3
4
ITEM NO. PART NO.
DESCRIPTION
QTY.
1
-----------
Canister Lid
1
2
24087600
Manual Canister
1
3
O/L
1/4” x 3/4” GR5 Bolt
3
4
O/L
1/4” Flat Washer
3
O/L- Obtain locally. Common fasteners available
through hardware and farm stores.
O/L- Obtain locally. Common fasteners
available through hardware and farm stores.
