3-4
Customizing this Notebook
2.
Connect your WebCam to the Notebook.
3.
The Notebook may auto detect your WebCam driver and enable the
WebCam function. If there is no detection of you WebCam you can
manually enable the WebCam by going to
Start Menu
à
Control Panel
à
Add Hardware
to add the new device.
Connecting the Printer
If your printer has a USB interface, you can then use the USB port on the
Notebook to connect the printer. The following instruction describes the
general procedure to connect a printer:
1.
Turn off the Notebook.
2.
Connect one end of the printer cable to the Notebook
’
s USB port and the
other end to the printer.
3.
Connect the power cord and turn on the printer.
4.
Turn on the Notebook and the system will detect a new device. Install the
required driver.
For further instructions, please refer to your printer
’
s manual.
Connecting the External Monitor or TV
You can connect an external monitor to your Notebook through the VGA port for
a larger view with higher resolution. To connect the monitor:
1.
Make sure that the Notebook is turned off.
2.
Plug the monitor
’
s D-type connector into the Notebook
’
s VGA port.
3.
Connect the monitor
’
s power cord and turn on the monitor.
4.
Turn on the Notebook and the monitor should respond by default. If not,
you can switch the display mode by pressing [
Fn
]+[
F2
]. Alternately, you
