MSI US60SE, Руководство пользователя

Страница: 18 / 53

US60SE 108M Wireless USB Adapter User Guide
mode of the access point with which it associates.
¾
Wireless Mode when Starting an Ad Hoc Network - Specifies Super G or 2.4 GHz
54/11 Mbps to start an ad hoc network if no matching network name is found after
scanning all available modes. This mode also allows the selection of the channel the
wireless adapter uses. The channels available depend on the regulatory domain. If
the adapter finds no other ad hoc adapters, this selection specifies which channel
the adapter starts the ad hoc network with. The wireless adapter must match the
wireless mode and channel of the clients it associates.
¾ 802.11 Authentication Mode - Select which mode the wireless adapter uses to
authenticate to an access point:
•
Automatic causes the adapter to attempt authentication using shared, but
switches it to open authentication if shared fails.
•
Open System enables an adapter to attempt authentication regardless of its
WEP settings. It will only associate with the access point if the WEP keys on
both the adapter and the access point match.
•
Shared-Key only allows the adapter to associate with access points that have
the same WEP key.
For infrastructure (access point) networks, click Preferred APs … to specify up to
four access points to the client adapter that attempts to be associated to the access
points.
Figure 3-7 Advanced tab of Profile Management
3.2.2 Remove a profile
1. Go to the Profile Management tab.
2. Select the profile to remove from the Profile List.
3. Click Remove .
3.2.3 Switch another Profile
1. Go to the Profile Management tab.
- 13 -