Wheel button
Dpi button
Battery cover
ID reset button
Receiver
Mouse
Receiver
Introduction
Congratulations on your purchase of the most innovative wireless mini
mouse. With an incredible sensitivity to surface details and high
tracking speed than other mice, the mouse can track reliably even on
tricky polished or wood-grain surfaces. It offers even more advance that
will make you more productive and more comfortable.
2.4GHz (distance 6~8m), 16 Channels/4096 ID
Using state-of-art technology. High tracking speed and sensitivity.
4-way scrolling.
Storable mini receiver
One year battery life.
Auto-Link, Plug and Play! No need to set the channel ID.
Power on/off switch
Data report rate : 125 Report/Sec.
800/1600 dpi switchable button.
2*AA Alkaline batteries included.
Power on/off
switch
This product complies with IEC 60825-1, Class I laser product.
(for Laser mouse
models only.)
Your product complies with FCC and CE rules.
Safety Notice
Please
DO NOT
direct the
laser beam at anyone's eyes.
Features
Low power Led
1. Insert the batteries
a. Take out the receiver on the bottom case first, press the battery cover
release button on the bottom of the mouse which is under the receiver.
b. Remove the battery compartment cover on the top case of the mouse.
c. Fit in the batteries accordingly to the diagram indicated in the battery
cabinet.
d. Close the battery compartments cover properly.
e. Make sure the Power on-off swich on the bottom of the mouse is ON.
f. The Low Power LED in the wheel bar will blink 3 seconds if the mouse
power is on.
A. Hardware Installation
+
-
A wrong battery placement
may cause batteries overheat.
Battery compartment cover
2 * AA batteries
Battery cover
release button
2. Connect the receiver
a. Turn off your PC.
b. Connect the receiver to USB port on PC
c. Turn on your PC
PC
USB port
The unit offers a strong power saving management. Once the mouse accesses the
sleeping mode, " to click any button of the mouse" is compulsory to wake it up.
Power on/off:
There is a Power on/off switch designed to save the batteries power while non-usage
of a longer period.
Users can push DPI button to change the resolution. The LED on scroll wheel will be
flashed when dpi has been successfully swithced.
4. Replace the new batteries
Please replace a pair of new batteries and follow the previous
instructions. (2, 3)
The red LED on the scroll wheel is the low batteries power indicator. It indicates that
batteries inside the mouse are needed to be replaced.
Note
5. Operation
4-Way Scrolling:
a. Vertical Scrolling
Roll wheel up to scroll up; roll wheel down to
scroll down.
b. Horizontal Scrolling
Hold the wheel to left to scroll left; hold the wheel
to right to scroll right. Release wheel to stop
scrolling function.
LED indicator
Press ID reset button
Execute ID connection
software
Led indicator
blinks faster
1
2
3
4
ID links OK!
While the mouse is working, if encountering any interference, the mouse and the
receiver will automatically source out and transfer to another free channel. During
the transferring, the cursor movement may have a second delay.
Note
3. Communication : The mouse & the receiver
The 2.4Ghz RF mouse features a dual-way transmission technology
which enables the mouse and the receiver auto-communication.
A. Auto-link mode
1. Make sure the Power on-off Switch on the bottom of the mouse is ON.
2. Operate the mouse, and the LED in the receiver will blink fast. Now
the mouse and the receiver is auto-linked successfully.
B. Manual mode
If you find the communication channel does not connect well, you can
use the software connection tool to re-connect the mouse & receiver
to
reset a new channel ID
. You are able to get the software from the
included diskette of the package or download from your local brand
vendor's website.
