MSI MS-S0081 Скачать руководство пользователя

Страница: 5 / 54

Preface

MS-S0081

Preface

MS-S0081

CE Conformity

Hereby, Mcro-Star Internatonal CO., LTD declares that ths devce

s n complance wth the essental safety requrements and other

relevant provsons set out n the European Drectve.

FCC-B Radio Frequency

Interference Statement

Ths equpment has been tested and found to comply wth the

lmts for a Class B dgtal devce, pursuant to Part 15 of the FCC Rules. These

lmts are desgned to provde reasonable protecton aganst harmful nterference

n a resdental nstallaton. Ths equpment generates, uses and can radate rado

frequency energy and, f not nstalled and used n accordance wth the nstruc-

ton manual, may cause harmful nterference to rado communcatons. However,

there s no guarantee that nterference wll not occur n a partcular nstallaton.

If ths equpment does cause harmful nterference to rado or televson recep-

ton, whch can be determned by turnng the equpment off and on, the user s

encouraged to try to correct the nterference by one or more of the measures

lsted below:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.
Consult the dealer or an experienced radio/television technician for

help.

Notice 1

The changes or modifications not expressly approved by the party responsible for

complance could vod the user’s authorty to operate the equpment.

Notice 2

Shelded nterface cables and AC power cord, f any, must be used n order to

comply wth the emsson lmts.

VOIR LA NOTICE D’INSTALLATION AVANT DE RACCORDER AU RESEAU.

Ths devce comples wth Part 15 of the FCC Rules. Operaton s subject to the

followng two condtons:

ths devce may not cause harmful nterference, and
ths devce must accept any nterference receved, ncludng nterference that

may cause undesred operaton.

￭

1)
2)

Содержание MS-S0081























































Результаты поиска

Содержание MS-S0081

Отзывы:

Похожие инструкции для MS-S0081

Бренды по названию

Популярные бренды

MSI MS-S0081, Руководство пользователя

Результаты поиска

Содержание MS-S0081

Отзывы:

Похожие инструкции для MS-S0081

Бренды по названию

Популярные бренды