MSI MS-S0081 страница 3 Скачать руководство пользователя

Страница: 3 / 54

Preface

MS-S0081

Preface

MS-S0081

Safety Instructions

Always read the safety nstructons carefully.
Keep ths User’s Manual for future reference.
Keep ths equpment away from humdty.

Lay this equipment on a reliable flat surface before setting it up.

The openngs on the enclosure are for ar convecton hence protects the

equpment from overheatng. DO NOT COVER THE OPENINGS.
Make sure the voltage of the power source and adjust properly 110/220V

before connectng the equpment to the power nlet.
Place the power cord such a way that people can not step on t. Do not place

anythng over the power cord.
Always Unplug the Power Cord before nsertng any add-on card or mod-

ule.
All cautons and warnngs on the equpment should be noted.
Never pour any lqud nto the openng that could damage or cause electrcal

shock.
If any of the followng stuatons arses, get the equpment checked by ser-

vce personnel:

The power cord or plug s damaged.
Lqud has penetrated nto the equpment.
The equpment has been exposed to mosture.
The equpment does not work well or you can not get t work accordng

to User’s Manual.
The equpment has dropped and damaged.
The equpment has obvous sgn of breakage.

DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT UNCONDI-

TIONED, STORAGE TEMPERATURE ABOVE 60

C (140

F), IT MAY DAM-

AGE THE EQUIPMENT.

CAUTION: Danger of exploson f battery s ncorrectly replaced. Replace only

wth the same or equvalent type recommended by the manufacturer.

警告使用者:
這是甲類資訊產品，在居住的環境中使用時，可能會造成無線電干擾，在這種情

況下，使用者會被要求採取某些適當的對策。

￭
￭
￭
￭
￭

￭

￭
￭

￭

◯
◯
◯
◯

◯
◯

￭

Содержание MS-S0081























































Результаты поиска

Содержание MS-S0081

Отзывы:

Похожие инструкции для MS-S0081

Бренды по названию

Популярные бренды

MSI MS-S0081, Руководство пользователя

Результаты поиска

Содержание MS-S0081

Отзывы:

Похожие инструкции для MS-S0081

Бренды по названию

Популярные бренды