manualshive.com logo in svg

MSI MS-98M3, Руководство пользователя, Страница: 46 / 56

Поделиться
Скачать
MSI MS-98M3 Скачать руководство пользователя страница 46

46

BIOS Item Contents

 

»

HECI Message Check Disable

This setting disables message check for BIOS boot path when sending messages.

 

»

MBP HOB Skip

Setting this option will skip MBP HOB.

 

»

HECI2 Interface Communication

This setting Adds/ Removes HECI2 device from PCI space.

 

»

KT Device

This setting enables/ disables KT Device.

 

»

End of Post Message

This setting enables/ disables End of Post Message sent to ME.

 

»

DOI3 Setting for HECI Disable

Setting this option disables setting DOI3 bit for all HECI devices.

 

»

MCTP Broadcast Cycle

This setting enables/ disables Management Component Transport Protocol (MCTP) 

Broadcast Cycle.

 

▶

Anti-Rollback SVN Configuration

 

»

Automatic HW-Enforced Anti-Rollback SVN

Setting this option enables will automatically activate the hardware-enforced Anti-

Rollback security version (HW ERB SVN). Once ME FW was successfully run on a 

platform, FW with lower ARB-VN will be blocked from execution.

 

»

Set HW-Enforced Anti-Rollback for Current SVN

Enable HW ERB mechanism for current ARB SVN value. FW with lower ARB-SVN 

will be blocked from execution. The value will be restored to disable after the 

command is sent. 

Содержание MS-98M3

























































Отзывы:

Нет отзывов