MSI MS-9856 Скачать руководство пользователя страница 4

Страница: 4 / 63

PREFACE

▍

FCC-B Radio Frequency Interference Statement

This equipment has been tested and

found to comply with the limits for a Class

B digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed

to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses and

can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is encouraged to try

to correct the interference by one or more of the measures listed below.

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

Consult the dealer or an experienced radio/television technician for help.

Notice 1

The changes or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.
Notice 2
Shielded interface cables and AC power cord, if any, must be used in order to com-

ply with the emission limits.

◯
◯
◯

◯

OIR LA NOTICE D’INSTALLATION AVANT DE RACCORDER AU RESEAU.
This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

this device may not cause harmful interference, and
this device must accept any interference received, including interference that

may cause undesired operation.

1)
2)

Micro-Star International

MS-9856

Содержание MS-9856
































































Результаты поиска

Содержание MS-9856

Отзывы:

MSI MS-9856, Руководство пользователя, Страница: 4 / 63

Результаты поиска

Содержание MS-9856

Отзывы: