5
Fig.2. Diagnostic cables
Fig.3. MS021 tester. Back view:
1 – Diode fuse; 2 – Power connector.
2
1
5. OPERATION OF THE DEVICE
1.Use the device as intended.
2.The tester is intended for indoor use. When used outdoors, external conditions and technical
characteristics of the device set out in item 2 of this manual, should be taken into consideration.
3.To avoid failure or damage to the tester, do not make any changes to the electrical diagram of
the device on your own. In case of failure, please contact the manufacturer or sales
representative.
4.Do not leave the device with closed probes for more than 2 minutes.
5.Working with a measuring probe, keep your fingers on the plastic part of it. Touching the metal
part of the measuring probe may cause measurement errors.
User Manual - MS021 Tester
English
