MSA MPC-127, Руководство по эксплуатации

Страница: 15 / 22

Version 0.1 14
Computer system unit of types
MPC-127, MPC-19-4
Table 16 – Check list № 1. Visual check
To be done Routine
Man-hours per 1
Device
Visually examine the
Product
1 Check completeness and appearance of the Product;
mechanical damage, paint defects must be absent;
legends are to be read easily;
2 Clean all surfaces by clean cloth;
3 Remove severe contamination, parts of corrosion, oil
spots:
– from metal surfaces: by suds, avoiding its penetration
inside the device; all surfaces clean dry by clean cloth
and dry up;
– from LED: by alcohol soaked cloth.
Do not use hard cloth, paper, glass cleaning liquids or
chemicals; Do not press hard on the surface while
cleaning; Do not spray liquid directly to the surface of
the Product;
4 In case of varnish damage clean it with abrasive cloth,
then alcohol soaked cloth, cover with varnish and let dry
1 person
5 mins
Check reliability of
cable connections
and grounding
buses 1 Make sure that connectors and attaching screws are
fastened tight, provide further fastening if needed;
2 Check integrity (no mechanical damage) of leading
cables which are visible
1 person
5 mins
Table 17 – Checklist №2. The Product’s operability check
Что делать Как делать
Трудозатраты
на 1 изделие
Check LEDs and
display
on the
screen of connected
monitor
1 Switch the Product on; picture shall be in accordance
with the pre-configured software;
2 The Product’s indication shall be in order and work
1 person
5 mins
Check ports
1 Check operability of any device connected to the
Product;
2 Check operability of each port of the Product
1 person
5 mins