(1)
Close the chinstrap buckle (if not possible, loosen the adjustment).
(2)
Tighten the side and rear adjustments to achieve a tight, yet
comfortable fit (ear should be comfortable).
(3)
Complete the adjustment with the chinstrap adjustment.
3.2
Advanced Adjustments
The following adjustments can be used to optimize wearing and comfort of the helmet after an initial assessment. They
should be performed if the basic adjustments do not enable a comfortable fit and must be performed without wearing the
helmet. Basic adjustments may need slight changes after advanced adjustments are completed.
3.2.1 Ride Height Adjustment
The suspension position in the helmet shell can be adjusted to modify ride height (3 positions), depending on wearer’s
head size and shape.
(1)
Unlock the 3 yellow tabs (left, right, rear) by pulling them forward and down
(2)
Adjust the suspension depth (left, right, rear) to the most comfortable ride
height. Ensure all tabs are positioned at the same depth.
–
A : for smaller head size
–
C : for larger head size
(3)
Lock the yellow tabs by pulling them forward and up.
3.2.2 Nape Strap Height Adjustment
Nape strap height may be adjusted to optimize tightness and rear comfort (3 positions).
7
US
3 Use and Adjustment