MRV Communications EM316LNXNM-OT, Руководство пользователя

Страница: 77 / 181

EM316LNXNM-OT Managing Fiber Driver Devices
PN 1275005-100 Rev E6 70
7.1.4. Device Descriptions
The "
description
" command sets a descriptive name for a chassis, slot, or port. Use the "
show
"
command to verify device changes. For example, the following command changes the device name from
"chassis 1" to "myFDchass":
fiberdriver# configure terminal
fiberdriver(config)# chassis 1
fiberdriver(chassis/1)# description myFDchass
fiberdriver(chassis/1)# show
Model: NC316BU-16
Name: myFDchass
Temp(C): 25
Temp Min(C): 5
Temp Limit(C): 55
fiberdriver(chassis/1)#
After entering a command, there may be a delay of several seconds before the action displays
in the "
show
" command.
The next command changes a slot description:
fiberdriver(config)# slot 1.1
fiberdriver(slot/1.1)# description myslot1.1
fiberdriver(slot/1.1)# exit
fiberdriver(config)#
The next command changes a port description:
fiberdriver(config)# port 1.1.1
fiberdriver(port/1.1.1)# description myport1.1.1
fiberdriver(port/1.1.1)# exit
fiberdriver(config)#
Chassis names are restricted to nine (9) characters.
Slot and port names are restricted to fifty (50) characters.
Device descriptions must be unique within the managed system. Duplicate names produce an error
message.
Device descriptions cannot "look like" device hardware descriptors (e.g. "1", "1.3", or "1.4.12"). Any name
with the form (integer)[.(integer)[.(integer)]] produces an error message, even if an integer is out of range
for a chassis, slot, or port in the system.