MRV Communications EM316LNXNM-OT, Руководство пользователя

Страница: 110 / 181

EM316LNXNM-OT SNMP Management
PN 1275005-100 Rev E6 103
12.6. SNMP Ports
To avoid resource conflicts, SNMP administrators can change the SNMP (UDP) ports for sending and
receiving traps.
The following CLI commands control UCP port usage:
CLI Command Description Default
snmp-server port X
UDP/IP port for the agent to listen for SNMP traffic 161
snmp-server trap-port X
UDP/IP port for the agent to send SNMP traps 162
Value changes do not affect the working environment for management until the system is restarted. Be
sure to properly configure connecting devices with the new contact information or communication with
the EM316LNXNM manager will not be re-established.
The example below shows the port change using the CLI:
fiberdriverconfig)# snmp-server port 150
fiberdriverconfig)# snmp-server trap-port 140
fiberdriverconfig)# show snmp-server
Administrative configuration:
Snmp V1: disabled
Snmp V2c: disabled
Snmp V3: disabled
Power Supply Traps: enabled
Module Traps: enabled
Snmp Port desired: 150
Trap Port desired: 140
SysContact:
SysName:
SysLocation:
Current operating configuration:
Snmp Port: 161
Trap Port: 162
fiberdriverconfig)#
The "Current operating configuration" values update after the changes are saved and the system is restarted
as shown below:
fiberdriverconfig)# write file
fiberdriverconfig)# exit
fiberdriver# restart warm
Refer to SNMP documentation or customer support for help changing SNMP ports.