mru DM9600 Скачать руководство пользователя страница 7

Страница: 7 / 57

USER MANUAL DM9600

MRU GmbH, D-74172 Neckarsulm

7 / 57

Information for product and safety

1.1.

Safety manual

All general information and safety precautions of MRU products are
listed in the supplied separate safety manual.
Therefore, this manual must be read and observed before the first use
of the instrument

Instrument-specific safety and warning requirements in this manual are
prefixed before dangerous actions.

1.2.

Safety precautions

The used categories of safety precautions are here explained once
more.

DANGER

Identifies an immediate, impending hazard that, if
ignored, will result in severe bodily injuries or death.

WARNING

Identifies an immediate, impending hazard that, if
ignored, may result in severe bodily injuries, material
damage or death.

CAUTION

Identifies a possibly dangerous situation that, if
ignored, may result in minor injuries.

ATTENTION

Identifies a possibly harmful situation that, if ignored,
may result in damages to the device or its
surroundings.

NOTE

Identifies user tips and other especially important in-
formation.

The explanation of safety notices:

CAUTION

HOT

–

danger of burns and fire hazards from gas

extraction probe.

Physical harm and property damage can be caused.

►

Cool down the probe tube.

Содержание DM9600


























































Результаты поиска

Содержание DM9600

Отзывы:

Похожие инструкции для DM9600

Бренды по названию

Популярные бренды

mru DM9600, Руководство пользователя

Результаты поиска

Содержание DM9600

Отзывы:

Похожие инструкции для DM9600

Бренды по названию

Популярные бренды