mru DM9600, Руководство пользователя

Страница: 20 / 57

USER MANUAL DM9600
MRU GmbH, D-74172 Neckarsulm
20 / 57
7 Performing measurement
In the basic configuration, each analyzer has the complete functionality
that the customer needs for pressure and temperature measurement.
For the other types of measurements the corresponding accessories are
required.
7.1. Auto-Log function
The measurement duration and the measurement interval for the meas-
urement can be set in the Auto-Log.
Auto-Log settings:
Measuring time is the complete time for one measurement cycle.
Press the button measuring time to be able to set the measurement
time (using the arrows up and down to change the time).
Press the button interval to select how frequently you want to save the
results.
Press the Site Selection to determine to which site the results will be
saved to.
Each interval will be saved to the selected site.
The Auto-Log can save results either on the internal memory or onto
the SD Card.
Press the Store button and then select where the results should be
stored.
Please make sure that there is enough storage space available.
Press the start button to start the Auto-Log, it will end automatically
after the defined measurement time has elapsed