User manual
DELTA
smart
8 / 50
MRU GmbH, D-74172 Neckarsulm
2
Introduction
•
This manual enables you to understand and safely operate
this
DELTA
smart
combustion analyzer
.
Please read this manual with great vigilant and get familiar
with the product before using it.
•
This analyzer may only be operated by competent person-
nel and for its intended use.
•
Please pay special attention to all safety directions and
warnings to prevent personal injuries and damaging of the
product.
•
We can
’t
be held responsible for any injuries and/or dam-
ages that occur by not following the instructions in this
manual.
•
Always keep the manual near you when working with the
analyzer, to be able to read instructions as needed.
Please ensure to hand over all documents to when hand-
ing the analyzer over to others.
2.1.
Intended use
The
DELTA
smart
analyzer is intended for short-term measurement in the con-
text of emission control measurements and adjustments at small furnaces. The
analyzer measures the measurements provided by VDI4206 and EN50379 met-
rics and stores them for further processing.
The
DELTA
smart
analyzer is specifically not intended as a safety device or per-
sonal protective equipment; it should not be used as a warning device to warn
people against the presence of harmful gases.
The
DELTA
smart
analyzer may only be used as indicated in this manual. Our
analyzers are checked according to the following regulations: VDE 0411
(EN61010) and DIN VDE 0701 before they leave the MRU GmbH factory.
MRU technical products are designed and manufactured according to DIN
31000/ VDE 1000 and UVV = VBG 4 of the professional guilds for fine mechan-
ics and electrical engineering.
MRU GmbH assures that the analyzer complies to the essential requirements
of the legal regulations of the member states of the electro-magnetic compat-
ibility (89/336/EWG).
WARNING
Risk from manipulations to the measuring device
Operational safety hazard
►
Modifications or changes to the measuring device are
not allowed.
